;
;************* GSD for BPS34 produced by Leuze electronic GmbH + Co. KG *************
;* ================================================================================ *
;* filename: leuz0687.gsd                                                           *
;* -------------------------------------------------------------------------------- *
;* author:   Joerg Linsenmayer (LEW)                                                *
;* rev.:     1.07                                                                   *
;* -------------------------------------------------------------------------------- *
;* changes:  - added new modul 27                                                   *
;*           - new parameter bits in modul 25                                       *
;*           - added diagnosis strings                                              *
;************************************************************************************
;
;
#Profibus_DP
;
; <Prm-Text-Def-List>
PrmText=1
Text(0) ="Binaerdarstellung"
Text(1) ="Vorzeichen mit Betrag"
EndPrmText

PrmText=2
Text(1) ="0,01"
Text(2) ="0,1"
Text(3) ="1"
Text(4) ="10"
Text(5) ="100"
Text(6) ="1000"
EndPrmText

PrmText=3
Text(0) ="Aus"
Text(1) ="Ein"
EndPrmText

PrmText=4
Text(0) ="ueberschreiten"
Text(1) ="unterschreiten"
EndPrmText

PrmText=5
Text(0) ="deaktiviert"
Text(1) ="nach Initialisierung"
Text(2) ="durch Ereignis"
EndPrmText

PrmText=6
Text(0) ="keine Funktion"
Text(1) ="nach gueltigem Messergebnis"
Text(2) ="nach Timeout"
Text(3) ="nach Timeout mit Retrigger"
Text(4) ="durch Stopereignis"
Text(5) ="durch Fehler"
EndPrmText

PrmText=8
Text(0) ="Aus"
Text(1) ="alle Messwerte"
Text(2) ="nur im Messwertfenster"
EndPrmText

PrmText=9
Text(0) ="ueberschreiten"
Text(1) ="unterschreiten"
EndPrmText

PrmText=13
Text(0) ="Nein"
Text(1) ="Ja"
EndPrmText

PrmText=14
Text(0) ="Aus"
Text(1) ="Ein"
EndPrmText

PrmText=15
Text(0)  ="keine Funktion"
Text(4)  ="Preset einlernen"
Text(5)  ="Min/Max Reset"
Text(7)  ="Messung Start"
Text(9)  ="Messung Stop"
Text(10) ="Grenzwert 1 einlernen"
Text(11) ="Grenzwert 2 einlernen"
Text(12) ="Geschw. Min/Max-Reset"
Text(13) ="Geschw. Messung starten"
Text(14) ="Geschw. Messung stoppen"
EndPrmText

PrmText=16
Text(0) ="LOW (0V)"
Text(1) ="HIGH (+Ub)"
EndPrmText

PrmText=17
Text(0) ="Inaktiv"
Text(1) ="Aktiv"
EndPrmText

PrmText=19
Text(3) ="1"
Text(4) ="10"
Text(5) ="100"
Text(6) ="1000"
EndPrmText

PrmText=20
Text(0) ="deaktiviert"
Text(1) ="durch Fehler"
Text(2) ="durch Stopereignis"
EndPrmText

PrmText=21
Text(0) ="in beide Richtungen pruefen"
Text(1) ="nur in eine Richtung pruefen"
EndPrmText

;----- <Prm-Ref-List> -------------------------------------------------
;------------------------------
; for device parameter data
;------------------------------
ExtUserPrmData=100 "Dummy"
Unsigned8 1 0-1
EndExtUserPrmData

;------------------------------
; for modul [M1] (19)
;------------------------------
ExtUserPrmData=115 "Vorzeichen"
Unsigned8 0 0-1
Prm_Text_Ref=1
EndExtUserPrmData

;------------------------------
; for modul [M2] (10)
;------------------------------
ExtUserPrmData=150 "Aufloesung in [mm]"
Unsigned8 3 1-6
Prm_Text_Ref=2
EndExtUserPrmData

;------------------------------
; for modul [M3] (6)
;------------------------------
ExtUserPrmData=120 "Presetwert in [mm]"
Unsigned32 0 0-10000000
EndExtUserPrmData

;------------------------------
; for modul [M5] (9)
;------------------------------
ExtUserPrmData=140 "Offsetwert in [mm]"
Signed32 0 -10000000-10000000
EndExtUserPrmData

;------------------------------
; for modul [M6] (8)
;------------------------------
ExtUserPrmData=130 "Skalierungsfaktor in [Promille]"
Unsigned16 1000 0-65535
EndExtUserPrmData

;------------------------------
; for modul [M7] (1)
;------------------------------
ExtUserPrmData=300 "Invertierung"
Unsigned8 0 0-1
Prm_Text_Ref=13
EndExtUserPrmData
ExtUserPrmData=301 "Modus"
Unsigned8 1 0-1
Prm_Text_Ref=14
EndExtUserPrmData
ExtUserPrmData=302 "Entprellzeit in [ms]"
Unsigned8 5 0-255
EndExtUserPrmData
ExtUserPrmData=303 "Einschaltverzoegerung in [ms]"
Unsigned16 0 0x0000-0xFFFF
EndExtUserPrmData
ExtUserPrmData=304 "Mindesteinschaltdauer in [ms]"
Unsigned16 0 0x0000-0xFFFF
EndExtUserPrmData
ExtUserPrmData=305 "Ausschaltverzoegerung in [ms]"
Unsigned16 0 0x0000-0xFFFF
EndExtUserPrmData
ExtUserPrmData=306 "Funktion"
Unsigned8 4 0-15
Prm_Text_Ref=15
EndExtUserPrmData

;------------------------------
; for modul [M8] (2)
;------------------------------
ExtUserPrmData=310 "Ruhepegel"
Unsigned8 0 0-1
Prm_Text_Ref=16
EndExtUserPrmData
ExtUserPrmData=350 "Geschw.-Grenzwert 1 steuert SA"
Bit(0) 0 0-1
Prm_Text_Ref=13
EndExtUserPrmData
ExtUserPrmData=351 "Geschw.-Grenzwert 2 steuert SA"
Bit(1) 0 0-1
Prm_Text_Ref=13
EndExtUserPrmData
ExtUserPrmData=352 "Geschw.-Grenzwert 3 steuert SA"
Bit(2) 0 0-1
Prm_Text_Ref=13
EndExtUserPrmData
ExtUserPrmData=353 "Geschw.-Grenzwert 4 steuert SA"
Bit(3) 0 0-1
Prm_Text_Ref=13
EndExtUserPrmData
ExtUserPrmData=354 "Dyn. Geschw.-Grenzw. steuert SA"
Bit(4) 0 0-1
Prm_Text_Ref=13
EndExtUserPrmData
ExtUserPrmData=312 "Einschaltdauer in [ms]"
Unsigned16 400 0-1300
EndExtUserPrmData
ExtUserPrmData=313 "[EF] Geschwindigkeit gueltig"
Bit(0) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=314 "[EF] Geschwindigkeit ungueltig"
Bit(1) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=315 "[EF] Grenzwert 1 erreicht"
Bit(2) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=316 "[EF] Grenzwert 1 nicht erreicht"
Bit(3) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=317 "[EF] ausserhalb des Messbereichs"
Bit(4) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=318 "[EF] innerhalb des Messbereichs"
Bit(5) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=319 "[EF] Grenzwert 2 erreicht"
Bit(6) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=320 "[EF] Grenzwert 2 nicht erreicht"
Bit(7) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=323 "[EF] fehlerhafte Messung"
Bit(2) 1 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=324 "[EF] erfolgreiche Messung"
Bit(3) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=325 "[EF] PROFIBUS pos. Flanke"
Bit(4) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=326 "[EF] PROFIBUS neg. Flanke"
Bit(5) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=327 "[EF] Geschw. Grenzwert erreicht"
Bit(6) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=328 "[EF] Geschw. GW nicht erreicht"
Bit(7) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=330 "[AF] Geschwindigkeit gueltig"
Bit(0) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=331 "[AF] Geschwindigkeit ungueltig"
Bit(1) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=332 "[AF] Grenzwert 1 erreicht"
Bit(2) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=333 "[AF] Grenzwert 1 nicht erreicht"
Bit(3) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=334 "[AF] ausserhalb vom Messbereich"
Bit(4) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=335 "[AF] innerhalb vom Messbereich"
Bit(5) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=336 "[AF] Grenzwert 2 erreicht"
Bit(6) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=337 "[AF] Grenzwert 2 nicht erreicht"
Bit(7) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=340 "[AF] fehlerhafte Messung"
Bit(2) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=341 "[AF] erfolgreiche Messung"
Bit(3) 1 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=342 "[AF] PROFIBUS pos. Flanke"
Bit(4) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=343 "[AF] PROFIBUS neg. Flanke"
Bit(5) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=344 "[AF] Geschw. Grenzwert erreicht"
Bit(6) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=345 "[AF] Geschw. GW nicht erreicht"
Bit(7) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData

;------------------------------
; for modul [M9] (3)
;------------------------------
ExtUserPrmData=180 "Messstartmodus"
Unsigned8 1 0-2
Prm_Text_Ref=5
EndExtUserPrmData
ExtUserPrmData=181 "Messstoppmodus"
Unsigned8 4 0-5
Prm_Text_Ref=6
EndExtUserPrmData
ExtUserPrmData=182 "Stopp-Timeout in [ms]"
Unsigned16 10000 0-65535
EndExtUserPrmData

;------------------------------
; for modul [M10] (4)
;------------------------------
ExtUserPrmData=110 "max. Messlaenge in [mm]"
Unsigned32 10000000 0-10000000
EndExtUserPrmData
ExtUserPrmData=111 "min. Messlaenge in [mm]"
Unsigned32 0 0x00000000-0x7FFFFFFF
EndExtUserPrmData

;------------------------------
; for modul [M11] (5)
;------------------------------
ExtUserPrmData=190 "Integrationstiefe"
Unsigned8 8 0-50
EndExtUserPrmData

;------------------------------
; for modul [M13] (12)
;------------------------------
ExtUserPrmData=200 "Modus"
Unsigned8 0 0-2
Prm_Text_Ref=8
EndExtUserPrmData
ExtUserPrmData=201 "Dauer"
Unsigned8 10 0-255
EndExtUserPrmData

;------------------------------
; for modul [M14] (13)
;------------------------------
ExtUserPrmData=160 "Mode"
Unsigned8 0 0-1
Prm_Text_Ref=3
EndExtUserPrmData
ExtUserPrmData=161 "Schaltart"
Unsigned8 0 0-1
Prm_Text_Ref=4
EndExtUserPrmData
ExtUserPrmData=162 "Hysterese in [mm]"
Unsigned16 0 0x0000-0xFFFF
EndExtUserPrmData
ExtUserPrmData=163 "Grenzwert in [mm]"
Signed32 0 -10000000-10000000
EndExtUserPrmData

;------------------------------
; for modul [M15] (14)
;------------------------------
ExtUserPrmData=170 "Mode"
Unsigned8 0 0-1
Prm_Text_Ref=3
EndExtUserPrmData
ExtUserPrmData=171 "Schaltart"
Unsigned8 0 0-1
Prm_Text_Ref=4
EndExtUserPrmData
ExtUserPrmData=172 "Hysterese in [mm]"
Unsigned16 0 0x0000-0xFFFF
EndExtUserPrmData
ExtUserPrmData=173 "Grenzwert in [mm]"
Signed32 0 -10000000-10000000
EndExtUserPrmData

;------------------------------
; for modul [M16] (15)
;------------------------------
ExtUserPrmData=210 "Modus"
Unsigned8 0 0-1
Prm_Text_Ref=14
EndExtUserPrmData
ExtUserPrmData=211 "Schaltart"
Unsigned8 0 0-1
Prm_Text_Ref=9
EndExtUserPrmData
ExtUserPrmData=212 "Hysterese in [mm]"
Unsigned16 0 0x0000-0xFFFF
EndExtUserPrmData

;------------------------------
; for modul [M17] (16)
;------------------------------
ExtUserPrmData=220 "Modus"
Unsigned8 0 0-1
Prm_Text_Ref=14
EndExtUserPrmData
ExtUserPrmData=221 "Schaltart"
Unsigned8 0 0-1
Prm_Text_Ref=9
EndExtUserPrmData
ExtUserPrmData=222 "Hysterese in [mm]"
Unsigned16 0 0x0000-0xFFFF
EndExtUserPrmData

;------------------------------
; for modul [M18] (20)
;------------------------------
ExtUserPrmData=230 "Toleranzzeit in [ms]"
Unsigned16 50 0-65535
EndExtUserPrmData
ExtUserPrmData=231 "Fehlerausgabe verzoegern"
Unsigned8 1 0-1
Prm_Text_Ref=13
EndExtUserPrmData

;------------------------------
; for modul [M21] (23)
;------------------------------
ExtUserPrmData=236 "Geschw.-Aufloesung in [mm/s]"
Unsigned8 3 3-6
Prm_Text_Ref=19
EndExtUserPrmData
ExtUserPrmData=237 "Geschw.-Skalierung in [Promille]"
Unsigned16 1000 0-65535
EndExtUserPrmData
ExtUserPrmData=238 "Geschw.-Integrationstiefe"
Unsigned8 8 0-255
EndExtUserPrmData
ExtUserPrmData=239 "Geschw.-Toleranzzeit in [ms]"
Unsigned16 50 0-65535
EndExtUserPrmData
ExtUserPrmData=240 "Geschw.-Fehlerausgabe verzoegern"
Unsigned8 1 0-1
Prm_Text_Ref=13
EndExtUserPrmData

;------------------------------
; for modul [M22] (24)
;------------------------------
ExtUserPrmData=244 "Geschwindigkeits-Messstart-Modus"
Unsigned8 0 0-2
Prm_Text_Ref=5
EndExtUserPrmData
ExtUserPrmData=245 "Geschwindigkeits-Messstop-Modus"
Unsigned8 0 0-2
Prm_Text_Ref=20
EndExtUserPrmData

;------------------------------
; for modul [M25] (27)
;------------------------------
ExtUserPrmData=250 "Geschwindigkeits-Grenzwert 1"
Bit(0) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=251 "Geschwindigkeits-Grenzwert 2"
Bit(1) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=252 "Geschwindigkeits-Grenzwert 3"
Bit(2) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=253 "Geschwindigkeits-Grenzwert 4"
Bit(3) 0 0-1
Prm_Text_Ref=17
EndExtUserPrmData
ExtUserPrmData=360 "Geschwindigkeits-Grenzwert 1"
Bit(4) 0 0-1
Prm_Text_Ref=21
EndExtUserPrmData
ExtUserPrmData=361 "Geschwindigkeits-Grenzwert 2"
Bit(5) 0 0-1
Prm_Text_Ref=21
EndExtUserPrmData
ExtUserPrmData=362 "Geschwindigkeits-Grenzwert 3"
Bit(6) 0 0-1
Prm_Text_Ref=21
EndExtUserPrmData
ExtUserPrmData=363 "Geschwindigkeits-Grenzwert 4"
Bit(7) 0 0-1
Prm_Text_Ref=21
EndExtUserPrmData
ExtUserPrmData=254 "Schaltart Geschw.-Grenzwert 1"
Bit(0) 0 0-1
Prm_Text_Ref=9
EndExtUserPrmData
ExtUserPrmData=255 "Schaltart Geschw.-Grenzwert 2"
Bit(1) 0 0-1
Prm_Text_Ref=9
EndExtUserPrmData
ExtUserPrmData=256 "Schaltart Geschw.-Grenzwert 3"
Bit(2) 0 0-1
Prm_Text_Ref=9
EndExtUserPrmData
ExtUserPrmData=257 "Schaltart Geschw.-Grenzwert 4"
Bit(3) 0 0-1
Prm_Text_Ref=9
EndExtUserPrmData
ExtUserPrmData=259 "Geschw.-Grenzwert 1 in [mm/s]"
Unsigned16 0 0-65535
EndExtUserPrmData
ExtUserPrmData=260 "Geschw.-Hysterese 1 in [mm/s]"
Unsigned16 0 0-65535
EndExtUserPrmData
ExtUserPrmData=261 "Bereichsanfang GW 1 in [mm]"
Signed32 0 -10000000-10000000
EndExtUserPrmData
ExtUserPrmData=262 "Bereichsende GW 1 in [mm]"
Signed32 0 -10000000-10000000
EndExtUserPrmData
ExtUserPrmData=263 "Geschw.-Grenzwert 2 in [mm/s]"
Unsigned16 0 0-65535
EndExtUserPrmData
ExtUserPrmData=264 "Geschw.-Hysterese 2 in [mm/s]"
Unsigned16 0 0-65535
EndExtUserPrmData
ExtUserPrmData=265 "Bereichsanfang GW 2 in [mm]"
Signed32 0 -10000000-10000000
EndExtUserPrmData
ExtUserPrmData=266 "Bereichsende GW 2 in [mm]"
Signed32 0 -10000000-10000000
EndExtUserPrmData
ExtUserPrmData=267 "Geschw.-Grenzwert 3 in [mm/s]"
Unsigned16 0 0-65535
EndExtUserPrmData
ExtUserPrmData=268 "Geschw.-Hysterese 3 in [mm/s]"
Unsigned16 0 0-65535
EndExtUserPrmData
ExtUserPrmData=269 "Bereichsanfang GW 3 in [mm]"
Signed32 0 -10000000-10000000
EndExtUserPrmData
ExtUserPrmData=270 "Bereichsende GW 3 in [mm]"
Signed32 0 -10000000-10000000
EndExtUserPrmData
ExtUserPrmData=271 "Geschw.-Grenzwert 4 in [mm/s]"
Unsigned16 0 0-65535
EndExtUserPrmData
ExtUserPrmData=272 "Geschw.-Hysterese 4 in [mm/s]"
Unsigned16 0 0-65535
EndExtUserPrmData
ExtUserPrmData=273 "Bereichsanfang GW 4 in [mm]"
Signed32 0 -10000000-10000000
EndExtUserPrmData
ExtUserPrmData=274 "Bereichsende GW 4 in [mm]"
Signed32 0 -10000000-10000000
EndExtUserPrmData

;------------------------------
; for modul [M27] (29)
;------------------------------
ExtUserPrmData=280 "Realwert in [mm/10]"
Unsigned16 10000 0-65535
EndExtUserPrmData
ExtUserPrmData=281 "Bereichsanfang BWK in [mm]"
Signed32 0 0-10000000
EndExtUserPrmData
ExtUserPrmData=282 "Bereichsende BWK in [mm]"
Signed32 10000000 0-10000000
EndExtUserPrmData

;----------------------------------------------------------------------

; <Unit-Definition-List>
GSD_Revision     = 2
Vendor_Name      = "Leuze electronic GmbH + Co."
Model_Name       = "BPS34 LEUZE"
Revision         = "1.07"
Ident_Number     = 0x0687
Protocol_Ident   = 0
Station_Type     = 0
FMS_supp         = 0
Hardware_Release = "V01.00"
Software_Release = "V02.01"

;
9.6_supp         = 1
19.2_supp        = 1
93.75_supp       = 1
187.5_supp       = 1
500_supp         = 1
1.5M_supp        = 1
3M_supp          = 1
6M_supp          = 1
12M_supp         = 1
MaxTsdr_9.6      = 15
MaxTsdr_19.2     = 15
MaxTsdr_93.75    = 15
MaxTsdr_187.5    = 15
MaxTsdr_500      = 15
MaxTsdr_1.5M     = 25
MaxTsdr_3M       = 50
MaxTsdr_6M       = 100
MaxTsdr_12M      = 200
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 0
24V_Pins            = 0
Implementation_Type = "SPC3"
Bitmap_Device       = "LEUZ0687"
;
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 0
Min_Slave_Intervall = 6
Modular_Station     = 1
Max_Module          = 27
Max_Input_Len       = 31
Max_Output_Len      = 40
Max_Data_Len        = 71
Fail_Safe           = 1
Max_Diag_Data_Len   = 16
Modul_Offset        = 0
Slave_Family        = 7

; <Unit-Diag-List>
Unit_Diag_Area      = 0-3
Value (0x03)        = "Fehlertyp: ERROR, "
Value (0x04)        = "Fehlertyp: CRITICAL WARNING, "
Unit_Diag_Area_End

Unit_Diag_Area      = 8-15
Value (0x02)        = "Instabile Ident-Spannung"
Value (0x06)        = "Motor laeuft nicht an"
Value (0x07)        = "Motordrehzahl fehlerhaft"
Value (0x08)        = "EEPROM-Zugriff fehlgeschlagen"
Value (0x09)        = "Checksumme 0-893 fehlerhaft"
Value (0x0A)        = "Checksumme 896-989 fehlerhaft"
Value (0x0B)        = "Checksumme 992-1021 fehlerhaft"
Value (0x0C)        = "Stack-Ueberlauf aufgetreten"
Value (0x60)        = "EEPROM-Zugr. in Init. fehlerhaft"
Value (0x61)        = "Motordrehzahl in EEPROM falsch"
Value (0x64)        = "Defekt in Bereich 0-893"
Value (0x65)        = "Defekt in Bereich 896-989"
Value (0x66)        = "Defekt in Bereich 992-1021"
Unit_Diag_Area_End

; UserPrmData: Length and Preset:
Max_User_Prm_Data_Len      = 174

Ext_User_Prm_Data_Const(0) = 0
Ext_User_Prm_Data_Ref(1)   = 100
Ext_User_Prm_Data_Ref(2)   = 100
Ext_User_Prm_Data_Ref(3)   = 100
Ext_User_Prm_Data_Ref(4)   = 100

; <Module-Definition-List>

Module="[M1] Positionswert" 0x93
Ext_Module_Prm_Data_Len   = 2
Ext_User_Prm_Data_Const(0)= 19
Ext_User_Prm_Data_Ref(1)  = 115
EndModule

Module="[M2] Aufloesung" 0x00
Ext_Module_Prm_Data_Len   = 2
Ext_User_Prm_Data_Const(0)= 10
Ext_User_Prm_Data_Ref(1)  = 150
EndModule

Module="[M3] Preset statisch" 0x20
Ext_Module_Prm_Data_Len   = 5
Ext_User_Prm_Data_Const(0)= 6
Ext_User_Prm_Data_Ref(1)  = 120
EndModule

Module="[M4] Preset dynamisch" 0xA4
Ext_Module_Prm_Data_Len   = 1
Ext_User_Prm_Data_Const(0)= 7
EndModule

Module="[M5] Offsetwert" 0x00
Ext_Module_Prm_Data_Len   = 5
Ext_User_Prm_Data_Const(0)= 9
Ext_User_Prm_Data_Ref(1)  = 140
EndModule

Module="[M6] Skalierung" 0x00
Ext_Module_Prm_Data_Len   = 3
Ext_User_Prm_Data_Const(0)= 8
Ext_User_Prm_Data_Ref(1)  = 130
EndModule

Module="[M7] Schalteingang" 0x10
Ext_Module_Prm_Data_Len   = 11
Ext_User_Prm_Data_Const(0)= 1
Ext_User_Prm_Data_Ref(1)  = 300
Ext_User_Prm_Data_Ref(2)  = 301
Ext_User_Prm_Data_Ref(3)  = 302
Ext_User_Prm_Data_Ref(4)  = 303
Ext_User_Prm_Data_Ref(6)  = 304
Ext_User_Prm_Data_Ref(8)  = 305
Ext_User_Prm_Data_Ref(10) = 306
EndModule

Module="[M8] Schaltausgang" 0x20
Ext_Module_Prm_Data_Len   = 9
Ext_User_Prm_Data_Const(0)= 2
Ext_User_Prm_Data_Ref(1)  = 310
Ext_User_Prm_Data_Ref(2)  = 350
Ext_User_Prm_Data_Ref(2)  = 351
Ext_User_Prm_Data_Ref(2)  = 352
Ext_User_Prm_Data_Ref(2)  = 353
Ext_User_Prm_Data_Ref(2)  = 354
Ext_User_Prm_Data_Ref(3)  = 312
Ext_User_Prm_Data_Ref(6)  = 313
Ext_User_Prm_Data_Ref(6)  = 314
Ext_User_Prm_Data_Ref(6)  = 315
Ext_User_Prm_Data_Ref(6)  = 316
Ext_User_Prm_Data_Ref(6)  = 317
Ext_User_Prm_Data_Ref(6)  = 318
Ext_User_Prm_Data_Ref(6)  = 319
Ext_User_Prm_Data_Ref(6)  = 320
Ext_User_Prm_Data_Ref(5)  = 323
Ext_User_Prm_Data_Ref(5)  = 324
Ext_User_Prm_Data_Ref(5)  = 325
Ext_User_Prm_Data_Ref(5)  = 326
Ext_User_Prm_Data_Ref(5)  = 327
Ext_User_Prm_Data_Ref(5)  = 328
Ext_User_Prm_Data_Ref(8)  = 330
Ext_User_Prm_Data_Ref(8)  = 331
Ext_User_Prm_Data_Ref(8)  = 332
Ext_User_Prm_Data_Ref(8)  = 333
Ext_User_Prm_Data_Ref(8)  = 334
Ext_User_Prm_Data_Ref(8)  = 335
Ext_User_Prm_Data_Ref(8)  = 336
Ext_User_Prm_Data_Ref(8)  = 337
Ext_User_Prm_Data_Ref(7)  = 340
Ext_User_Prm_Data_Ref(7)  = 341
Ext_User_Prm_Data_Ref(7)  = 342
Ext_User_Prm_Data_Ref(7)  = 343
Ext_User_Prm_Data_Ref(7)  = 344
Ext_User_Prm_Data_Ref(7)  = 345
EndModule

Module="[M9] Steuerung" 0x30
Ext_Module_Prm_Data_Len   = 5
Ext_User_Prm_Data_Const(0)= 3
Ext_User_Prm_Data_Ref(1)  = 180
Ext_User_Prm_Data_Ref(2)  = 181
Ext_User_Prm_Data_Ref(3)  = 182
EndModule

Module="[M10] Messwerterfassung" 0x00
Ext_Module_Prm_Data_Len   = 9
Ext_User_Prm_Data_Const(0)= 4
Ext_User_Prm_Data_Ref(1)  = 110
Ext_User_Prm_Data_Ref(5)  = 111
EndModule

Module="[M11] Messwertaufbereitung" 0x20
Ext_Module_Prm_Data_Len   = 3
Ext_User_Prm_Data_Const(0)= 5
Ext_User_Prm_Data_Ref(1)  = 190
Ext_User_Prm_Data_Const(2)= 0
EndModule

Module="[M12] Status" 0x10
Ext_Module_Prm_Data_Len   = 1
Ext_User_Prm_Data_Const(0)= 11
EndModule

Module="[M13] MinMax Position" 0xB7
Ext_Module_Prm_Data_Len   = 3
Ext_User_Prm_Data_Const(0)= 12
Ext_User_Prm_Data_Ref(1)  = 200
Ext_User_Prm_Data_Ref(2)  = 201
EndModule

Module="[M14] Grenzwert 1 statisch" 0x00
Ext_Module_Prm_Data_Len   = 9
Ext_User_Prm_Data_Const(0)= 13
Ext_User_Prm_Data_Ref(1)  = 160
Ext_User_Prm_Data_Ref(2)  = 161
Ext_User_Prm_Data_Ref(3)  = 162
Ext_User_Prm_Data_Ref(5)  = 163
EndModule

Module="[M15] Grenzwert 2 statisch" 0x00
Ext_Module_Prm_Data_Len   = 9
Ext_User_Prm_Data_Const(0)= 14
Ext_User_Prm_Data_Ref(1)  = 170
Ext_User_Prm_Data_Ref(2)  = 171
Ext_User_Prm_Data_Ref(3)  = 172
Ext_User_Prm_Data_Ref(5)  = 173
EndModule

Module="[M16] Grenzwert 1 dynamisch" 0xA3
Ext_Module_Prm_Data_Len   = 5
Ext_User_Prm_Data_Const(0)= 15
Ext_User_Prm_Data_Ref(1)  = 210
Ext_User_Prm_Data_Ref(2)  = 211
Ext_User_Prm_Data_Ref(3)  = 212
EndModule

Module="[M17] Grenzwert 2 dynamisch" 0xA3
Ext_Module_Prm_Data_Len   = 5
Ext_User_Prm_Data_Const(0)= 16
Ext_User_Prm_Data_Ref(1)  = 220
Ext_User_Prm_Data_Ref(2)  = 221
Ext_User_Prm_Data_Ref(3)  = 222
EndModule

Module="[M18] Messfehlertoleranz" 0x00
Ext_Module_Prm_Data_Len   = 4
Ext_User_Prm_Data_Const(0)= 20
Ext_User_Prm_Data_Ref(1)  = 230
Ext_User_Prm_Data_Ref(3)  = 231
EndModule

Module="[M19] Service" 0x30
Ext_Module_Prm_Data_Len   = 1
Ext_User_Prm_Data_Const(0)= 21
EndModule

Module="[M20] Geschwindigkeit" 0x93
Ext_Module_Prm_Data_Len   = 1
Ext_User_Prm_Data_Const(0)= 22
EndModule

Module="[M21] Parameter Geschw." 0x00
Ext_Module_Prm_Data_Len   = 8
Ext_User_Prm_Data_Const(0)= 23
Ext_User_Prm_Data_Ref(1)  = 236
Ext_User_Prm_Data_Ref(2)  = 237
Ext_User_Prm_Data_Ref(4)  = 238
Ext_User_Prm_Data_Ref(5)  = 239
Ext_User_Prm_Data_Ref(7)  = 240 
EndModule

Module="[M22] Steuerung Geschw." 0x30
Ext_Module_Prm_Data_Len   = 3
Ext_User_Prm_Data_Const(0)= 24
Ext_User_Prm_Data_Ref(1)  = 244
Ext_User_Prm_Data_Ref(2)  = 245
EndModule

Module="[M23] Status Geschwindigkeit" 0x11
Ext_Module_Prm_Data_Len   = 1
Ext_User_Prm_Data_Const(0)= 25
EndModule

Module="[M24] MinMax Geschwindigkeit" 0x97
Ext_Module_Prm_Data_Len   = 1
Ext_User_Prm_Data_Const(0)= 26
EndModule

Module="[M25] Geschw. Grenzwert stat." 0x00
Ext_Module_Prm_Data_Len   = 51
Ext_User_Prm_Data_Const(0)= 27
Ext_User_Prm_Data_Ref(1)  = 250
Ext_User_Prm_Data_Ref(1)  = 251
Ext_User_Prm_Data_Ref(1)  = 252
Ext_User_Prm_Data_Ref(1)  = 253
Ext_User_Prm_Data_Ref(1)  = 360
Ext_User_Prm_Data_Ref(1)  = 361
Ext_User_Prm_Data_Ref(1)  = 362
Ext_User_Prm_Data_Ref(1)  = 363
Ext_User_Prm_Data_Ref(2)  = 254
Ext_User_Prm_Data_Ref(2)  = 255
Ext_User_Prm_Data_Ref(2)  = 256
Ext_User_Prm_Data_Ref(2)  = 257
Ext_User_Prm_Data_Ref(3)  = 259
Ext_User_Prm_Data_Ref(5)  = 260
Ext_User_Prm_Data_Ref(7)  = 261
Ext_User_Prm_Data_Ref(11) = 262
Ext_User_Prm_Data_Ref(15) = 263
Ext_User_Prm_Data_Ref(17) = 264
Ext_User_Prm_Data_Ref(19) = 265
Ext_User_Prm_Data_Ref(23) = 266
Ext_User_Prm_Data_Ref(27) = 267
Ext_User_Prm_Data_Ref(29) = 268
Ext_User_Prm_Data_Ref(31) = 269
Ext_User_Prm_Data_Ref(35) = 270
Ext_User_Prm_Data_Ref(39) = 271
Ext_User_Prm_Data_Ref(41) = 272
Ext_User_Prm_Data_Ref(43) = 273
Ext_User_Prm_Data_Ref(47) = 274
EndModule

Module="[M26] Geschw. Grenzwert dyn." 0xAC
Ext_Module_Prm_Data_Len   = 1
Ext_User_Prm_Data_Const(0)= 28
EndModule

Module="[M27] Bandwertkorrektur" 0x00
Ext_Module_Prm_Data_Len   = 11
Ext_User_Prm_Data_Const(0)= 29
Ext_User_Prm_Data_Ref(1)  = 280
Ext_User_Prm_Data_Ref(3)  = 281
Ext_User_Prm_Data_Ref(7)  = 282
EndModule