;=======================================================================
; GSD-file for I.S.1 remote I/O-system (Ex i),  R.STAHL SCHALTGERÄTE GMBH 
;
; date : 02.05.07
; file : STA_049A.GSE                     
; GSD Revision = "V1.24"
;
;=======================================================================
; limitation of datablock length using SPC4:      112 Byte Input + 80 Byte  output data !
; Modulspec. parameter extended to 5 Byte per module.
; order numbers for IOM´s included             06.05.99
;
; CPM parameter red position changed           27.05.99
; times for pulse extension increased          20.07.99
; DIM with status and DIM+CF added             04.08.99
; Default at DIM+CF = Freq. 1kHz               28.09.99
; ----------------------------------------------------------------------
; New moduls added:      9461/12-08-21         
; (Standard identifier   9470/12-16-11
;  format)               9475/12-04-11
;                        9475/12-04-21
;                        9475/12-04-31
;                        9475/12-08-51
;                        9475/12-08-61
;                        9480/12-08-11
;                        9481/12-08-11
; komments deleted                             12.11.99     GSD V0.65    
;                                                                        ^  older CPM firmware
; _______________________________________________________________________|_____________________
;                                                                        |
; IOM Modul Identfier with Typnumbers                                    |  CPM firmware V00-11 
; changed to special identifier format (SKF)                             v  and higher
;
; New moduls added:      9471/10-16-11         
;                        9477/10-08-12         14.12.99     GSD V1.00
; ----------------------------------------------------------------------
; Parameter ´MeasureRangeLimits ac. NAMUR´ 
; added for all AIM         
; New module 9477/15-08-12 DOM 8     Rel Z2
; New module 9475/12-07-71 DOM 7      Exi 4
; Alarmmessage ´slot error CPM´ added
; New measurement ranges added 
; for 9480 and 9481                            22.05.00     GSD V1.01
; _______________________________________________________________________|_____________________
;                                                                        |
;                                                         CPM redundancy | 
; Modules for redundant CPM with Status-                  supported from:| CPM firmware V01-20 
; und Outputregister added
;                                              17.07.00     GSD V1.02
;
; ----------------------------------------------------------------------
; 
; Device specific diagnosis added: "red. CPM descriptor requested"
; Parameter Operation Mode and Input filter added at 9480 TIMR
;
;                                              24.10.00     GSD V1.03
; ----------------------------------------------------------------------
; limitation of datablock length extended by 1 Byte to:   
; max. 113 Byte Input + 81 Byte Output Data !
; 
;                                              27.11.00     GSD V1.04
; ----------------------------------------------------------------------
; Values for MaxTsdr changed
; 
;                                              04.12.00     GSD V1.05
; ----------------------------------------------------------------------
; Line redundancy added:  CPM parameter and diagnosis messages
; Keyword: Modul_Offset=0 added
; Parameter ´IOM 9-16 on rail X4´ added
;                                              30.04.01     GSD V1.06
; ----------------------------------------------------------------------
; Modules added:                           
; 9475/22-08-51 DOM 8 OD    Exi2
; 9475/22-08-61 DOM 8 OD    Exi3	
; 9477/12-08-12 DOM 8 60V Rel Z1	
; 9477/12-06-12 DOM 6 250VRel Z1	
;
; New Parameter for 9475/.. from Rev. F:    Test current On/Off
; New error message ´hardware disable outputs´for 9475/22..
;
;                                              16.11.01     GSD V1.07
; ----------------------------------------------------------------------
; New Parameter for TIM 8 mV  9481/..    (modul FW-Rev. 01-01)    
; Thermocouple Typ XK(L)
;
;                                              29.05.02    GSD V1.08
; ----------------------------------------------------------------------
; Modules added:                           
; 9440/22-01-21 CPM Z1 230V
; 9475/22-04-21 DOM 4 OD    Exi2
;                                              28.08.02    GSD V1.09
;=======================================================================
; 
; ==>  GSD_Revision = 4
;
; C2_READWRITE_SUPP = 1
; Subsys_Module_Dir_Index(1) = 148  ;Pointer to HART directory process data
; Ident_Maintenance_supp = 1          ;I+M functions acc. PNO Spec. supported
; Info_Text ="I/O System"
; Module_Reference  (in all Module descriptors)
:
; Module added:                           
; 9440/22-01-11 CPM Z1 PNO 24V
;
;                                              04.06.04     GSD V1.20
; ----------------------------------------------------------------------
; Parameter ´Scan HART Livelist On/Off´ 
; added.
;                                              29.06.04     GSD V1.21                                           
; ----------------------------------------------------------------------
; ==>  GSD_Revision = 5     -> DPV1 spec. keywords added
;
; Exn - modules added:                           
; 9461/15-08-12 AIMH8         2w Exn 
; 9466/15-08-12 AOMH 8            Exn 
; 9470/25-16-12 DIM16       Nam Exn
; 9470/25-16-12 DIM16+CF Nam Exn
; 9471/15-16-12 DIM16         24V Exn
; 9471/15-16-12 DIM16+CF  24V Exn
:
;                                              31.03.06     GSD V1.23 
; ----------------------------------------------------------------------
; New parameter for 9480:  ( module FW-Revision from 02-04 required )
;  - PT100 GOST
;  - M50 GOST
;  - M100 GOST
;                                              02.05.07     GSD V1.24 
; ----------------------------------------------------------------------
;
#Profibus_DP
GSD_Revision = 5
Vendor_Name = "R. STAHL SCHALTGERÄTE GMBH"
Model_Name = "I.S.1 I/O STAHL"
Revision = "V1.24"
Info_Text ="I/O System"
Ident_Number = 0x049A
Protocol_Ident = 0
Station_Type = 0
FMS_supp = 0
Hardware_Release = ">= A"
Software_Release = ">= 00-11"
9.6_supp = 1
19.2_supp = 1
93.75_supp = 1
187.5_supp = 1
500_supp = 1
1.5M_supp = 1
MaxTsdr_9.6 = 60
MaxTsdr_19.2 = 60
MaxTsdr_93.75 = 60
MaxTsdr_187.5 = 60
MaxTsdr_500 = 100
MaxTsdr_1.5M = 150
Redundancy = 0
Repeater_Ctrl_Sig = 0
24V_Pins = 0
;
Implementation_Type="SPC4"
Bitmap_Device="STA_IS1"
Bitmap_Diag = "STA_IS1d"
Bitmap_SF = "STA_IS1s"
;
Modul_Offset=0
;
C1_READ_WRITE_SUPP = 0
C2_READ_WRITE_SUPP = 1
C2_Max_Data_Len = 75
C2_Response_Timeout= 50
C2_Max_Count_Channels = 1
Max_Initiate_PDU_Length = 75
Ident_Maintenance_supp = 1
;
;----------------------  Slave specific values ----------------------
;
;
Freeze_Mode_supp = 1
Sync_Mode_supp = 1
Auto_Baud_supp = 1
Set_Slave_Add_supp = 0
;User_Prm_Data_Len = 10
;User_Prm_Data=0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00
Max_User_Prm_Data_Len = 90     ; 10 + 16x5

Min_Slave_Intervall = 20
Modular_Station = 1
Max_Module = 17
Max_Input_Len = 113
Max_Output_Len = 81
Max_Data_Len = 194
Max_Diag_Data_Len = 119
;
;---------- Byte 0 - 2 ------------------------
;
Unit_Diag_Bit(0x00) = "error IS1 paramerter"
Unit_Diag_Bit(0x01) = "error IS1 configuration"
Unit_Diag_Bit(0x02) = "Version conflict GSD/CPM" 
Unit_Diag_Bit(0x03) = "SPC4 error" 
Unit_Diag_Bit(0x04) = "slot error CPM" 
Unit_Diag_Bit(0x05) = "red. CPM descriptor requested"
Unit_Diag_Bit(0x06) = "G Diagnose Byte 0 Bit 6"
Unit_Diag_Bit(0x07) = "G Diagnose Byte 0 Bit 7" 
Unit_Diag_Bit(0x08) = "X1: receieve from AS disturbed" 
Unit_Diag_Bit(0x09) = "X2: receieve from AS disturbed" 
Unit_Diag_Bit(0x0A) = "X1: transmit to AS disturbed" 
Unit_Diag_Bit(0x0B) = "X2: transmit to AS disturbed" 
Unit_Diag_Bit(0x0C) = "G Diagnose Byte 1 Bit 4" 
Unit_Diag_Bit(0x0D) = "G Diagnose Byte 1 Bit 5" 
Unit_Diag_Bit(0x0E) = "G Diagnose Byte 1 Bit 6" 
Unit_Diag_Bit(0x0F) = "G Diagnose Byte 1 Bit 7" 
;Unit_Diag_Bit(0x10) = "G Diagnose Byte 2 Bit 0" 
;Unit_Diag_Bit(0x11) = "G Diagnose Byte 2 Bit 1" 
;Unit_Diag_Bit(0x12) = "G Diagnose Byte 2 Bit 2" 
;Unit_Diag_Bit(0x13) = "G Diagnose Byte 2 Bit 3" 
;Unit_Diag_Bit(0x14) = "G Diagnose Byte 2 Bit 4" 
;Unit_Diag_Bit(0x15) = "G Diagnose Byte 2 Bit 5" 
;Unit_Diag_Bit(0x16) = "G Diagnose Byte 2 Bit 6" 
;Unit_Diag_Bit(0x17) = "G Diagnose Byte 2 Bit 7" 
;
;
;---------- Byte 3 ------------------------
;
Unit_Diag_Area = 24 - 26  
;Value(0) = " Modul 1   OK"
Value(1) = "IOM 1 prim. railbus. disturbed"
Value(2) = "IOM 1 red. railbus. disturbed"
Value(3) = "IOM 1 no response"
Value(4) = "IOM 1 config unequal module"
Value(5) = "IOM 1 hardware failure"
Value(6) = "IOM 1 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(27) = "IOM 1 hardware disable outputs"
;
;
Unit_Diag_Area = 28 - 30  
Value(1) = "IOM 2 prim. railbus disturbed"
Value(2) = "IOM 2 red. railbus disturbed"
Value(3) = "IOM 2 no response"
Value(4) = "IOM 2 config unequal module"
Value(5) = "IOM 2 hardware failure"
Value(6) = "IOM 2 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(31) = "IOM 2 hardware disable outputs"
;
;
;---------- Byte 4 ------------------------
;
Unit_Diag_Area = 32 - 34  
Value(1) = "IOM 3 prim. railbus disturbed"
Value(2) = "IOM 3 red. railbus disturbed"
Value(3) = "IOM 3 no response"
Value(4) = "IOM 3 config unequal module"
Value(5) = "IOM 3 hardware failure"
Value(6) = "IOM 3 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(35) = "IOM 3 hardware disable outputs"
;
;
Unit_Diag_Area = 36 - 38  
Value(1) = "IOM 4 prim. railbus disturbed"
Value(2) = "IOM 4 red. railbus disturbed"
Value(3) = "IOM 4 no response"
Value(4) = "IOM 4 config unequal module"
Value(5) = "IOM 4 hardware failure"
Value(6) = "IOM 4 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(39) = "IOM 4 hardware disable outputs"
;
;
;---------- Byte 5 ------------------------
;
Unit_Diag_Area = 40 - 42  
Value(1) = "IOM 5 prim. railbus disturbed"
Value(2) = "IOM 5 red. railbus disturbed"
Value(3) = "IOM 5 no response"
Value(4) = "IOM 5 config unequal module"
Value(5) = "IOM 5 hardware failure"
Value(6) = "IOM 5 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(43) = "IOM 5 hardware disable outputs"
;
;
Unit_Diag_Area = 44 - 46  
Value(1) = "IOM 6 prim. railbus disturbed"
Value(2) = "IOM 6 red. railbus disturbed"
Value(3) = "IOM 6 no response"
Value(4) = "IOM 6 config unequal module"
Value(5) = "IOM 6 hardware failure"
Value(6) = "IOM 6 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(47) = "IOM 6 hardware disable outputs"
;
;
;
;---------- Byte 6 ------------------------
;
Unit_Diag_Area = 48 - 50  
Value(1) = "IOM 7 prim. railbus disturbed"
Value(2) = "IOM 7 red. railbus disturbed"
Value(3) = "IOM 7 no response"
Value(4) = "IOM 7 config unequal module"
Value(5) = "IOM 7 hardware failure"
Value(6) = "IOM 7 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(51) = "IOM 7 hardware disable outputs"
;
;
Unit_Diag_Area = 52 - 54
Value(1) = "IOM 8 prim. railbus disturbed"
Value(2) = "IOM 8 red. railbus disturbed"
Value(3) = "IOM 8 no response"
Value(4) = "IOM 8 config unequal module"
Value(5) = "IOM 8 hardware failure"
Value(6) = "IOM 8 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(55) = "IOM 8 hardware disable outputs"
;
;
;---------- Byte 7 ------------------------
;
Unit_Diag_Area = 56 - 58  
Value(1) = "IOM 9 prim. railbus disturbed"
Value(2) = "IOM 9 red. railbus disturbed"
Value(3) = "IOM 9 no response"
Value(4) = "IOM 9 config unequal module"
Value(5) = "IOM 9 hardware failure"
Value(6) = "IOM 9 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(59) = "IOM 9 hardware disable outputs"
;
;
Unit_Diag_Area = 60 - 62
Value(1) = "IOM 10 prim. railbus disturbed"
Value(2) = "IOM 10 red. railbus disturbed"
Value(3) = "IOM 10 no response"
Value(4) = "IOM 10 config unequal module"
Value(5) = "IOM 10 hardware failure"
Value(6) = "IOM 10 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(63) = "IOM 10 hardware disable output"
;
;
;---------- Byte 8 ------------------------
;
Unit_Diag_Area = 64 - 66  
Value(1) = "IOM 11 prim. railbus disturbed"
Value(2) = "IOM 11 red. railbus disturbed"
Value(3) = "IOM 11 no response"
Value(4) = "IOM 11 config unequal module"
Value(5) = "IOM 11 hardware failure"
Value(6) = "IOM 11 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(67) = "IOM 11 hardware disable output"
;
;
Unit_Diag_Area = 68 - 70
Value(1) = "IOM 12 prim. railbus disturbed"
Value(2) = "IOM 12 red. railbus disturbed"
Value(3) = "IOM 12 no response"
Value(4) = "IOM 12 config unequal module"
Value(5) = "IOM 12 hardware failure"
Value(6) = "IOM 12 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(71) = "IOM 12 hardware disable output"
;
;
;---------- Byte 9 ------------------------
;
Unit_Diag_Area = 72 - 74  
Value(1) = "IOM 13 prim. railbus disturbed"
Value(2) = "IOM 13 red. railbus disturbed"
Value(3) = "IOM 13 no response"
Value(4) = "IOM 13 config unequal module"
Value(5) = "IOM 13 hardware failure"
Value(6) = "IOM 13 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(75) = "IOM 13 hardware disable output"
;
;
Unit_Diag_Area = 76 - 78
Value(1) = "IOM 14 prim. railbus disturbed"
Value(2) = "IOM 14 red. railbus disturbed"
Value(3) = "IOM 14 no response"
Value(4) = "IOM 14 config unequal module"
Value(5) = "IOM 14 hardware failure"
Value(6) = "IOM 14 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(79) = "IOM 14 hardware disable output"
;
;
;---------- Byte 10 ------------------------
;
Unit_Diag_Area = 80 - 82  
Value(1) = "IOM 15 prim. railbus disturbed"
Value(2) = "IOM 15 red. railbus disturbed"
Value(3) = "IOM 15 no response"
Value(4) = "IOM 15 config unequal module"
Value(5) = "IOM 15 hardware failure"
Value(6) = "IOM 15 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(83) = "IOM 15 hardware disable output"
;
;
Unit_Diag_Area = 84 - 86
Value(1) = "IOM 16 prim. railbus disturbed"
Value(2) = "IOM 16 red. railbus disturbed"
Value(3) = "IOM 16 no response"
Value(4) = "IOM 16 config unequal module"
Value(5) = "IOM 16 hardware failure"
Value(6) = "IOM 16 value6 - reserved"
Unit_Diag_Area_End
;
Unit_Diag_Bit(87) = "IOM 16 hardware disable output"
;
;
;
Slave_Family=3
; IS1 ist ein I/O-System
;
; global definition of signal errors:
;
;Channel_Diag(16) = "D16"
;Channel_Diag(17) = "D17"
;Channel_Diag(18) = "D18"
;Channel_Diag(19) = "D19"
;Channel_Diag(20) = "D20"
;Channel_Diag(21) = "D21"
;Channel_Diag(22) = "D22"
;Channel_Diag(23) = "D23"
;Channel_Diag(24) = "D24"
;Channel_Diag(25) = "D25"
;Channel_Diag(26) = "D26"
;Channel_Diag(27) = "D27"
;Channel_Diag(28) = "D28"
;Channel_Diag(29) = "D29"
;Channel_Diag(30) = "D30"
;Channel_Diag(31) = "D31"
;
;
; --------- User_Prm_Data-Definition ---------------------------------
;
PrmText = 1                     ; Textnummer 1
Text(0) = "OFF"
Text(1) = "ON"
EndPrmText
;
PrmText = 2                     
Text(0) = "50 Hz"
Text(1) = "60 Hz"
EndPrmText
;
PrmText = 3                     
Text(0) = "8 Inputs"
Text(1) = "2 Inputs"
EndPrmText
;
PrmText = 4                     
Text(0) = "Pt100"
Text(1) = "Pt500"
Text(2) = "Pt1000"
Text(3) = "Ni100"
Text(4) = "Ni500"
Text(5) = "Ni1000"
Text(6) = "Resistance 10K"
Text(7) = "Resistance 5K"
Text(8) = "Resistance 2K5"
Text(9) = "Resistance 500R"
Text(10) = "PT100 GOST"
Text(11) = "M50 GOST"
Text(12) = "M100 GOST"
Text(13) = "Reserved 1"
Text(14) = "Reserved 2"
Text(15) = "Reserved 3"
EndPrmText
;
PrmText = 5                     
Text(0) = "2 wire"
Text(1) = "3 wire"
Text(2) = "4 wire"
EndPrmText
;
PrmText = 6
Text(3) = " Alarm Code "
Text(6) = " freeze  (init. value 0%)"
EndPrmText
;
PrmText = 7                     
Text(0) = "0..100 mV"
Text(1) = "THC Type B"
Text(2) = "THC Type E"
Text(3) = "THC Type J"
Text(4) = "THC Type K"
Text(5) = "THC Type N"
Text(6) = "THC Type R"
Text(7) = "THC Type S"
Text(8) = "THC Type T"
Text(9) = "THC Type L"
Text(10) = "THC Type U"
Text(11) = "THC Type XK(L)"
EndPrmText
;
PrmText = 8
Text(0) = "intern"
Text(1) = "extern SV1"
Text(2) = "extern SV2"
EndPrmText
;
PrmText = 9
Text(0) = "No"
Text(1) = "Yes"
EndPrmText
;
PrmText = 10 
Text(0) = "No"
Text(1) = "Yes"
EndPrmText
;
PrmText = 11 
Text(0) = "balanced"
Text(1) = "unbalanced"
EndPrmText
;
PrmText = 12
Text(0) = "0 .. 20 mA"
Text(1) = "4 .. 20 mA"
EndPrmText
;
PrmText = 13
Text(0) = "small"
Text(1) = "medium"
Text(2) = "big (50Hz)"
Text(3) = "big (60Hz)"
EndPrmText
;
PrmText = 14
Text(0) = " - 10% (live zero only)"
Text(1) = "    0%"
Text(2) = "  100%"
Text(3) = " alarm code (>117,6%)"
Text(6) = "freeze  (init. value 0%)"
Text(7) = "freeze  (init. value 100%)"
EndPrmText
;
PrmText = 15
Text(0) = "   0  "
Text(1) = "   1  "
Text(2) = "freeze (init. value 0)"
Text(3) = "freeze (init. value 1)" 
EndPrmText
;
PrmText = 16
Text(0) = "   0 sec"
Text(1) = "0,6 sec"
Text(2) = "1,2 sec"
Text(3) = "2,4 sec"
EndPrmText
;
PrmText = 17
Text(0) = " - 10% (live zero only)"
Text(1) = "    0%"
Text(2) = "  100%"
Text(3) = "  110%"
Text(7) = "freeze"
EndPrmText
;
;
PrmText = 18
Text(0) = "   0  "
Text(1) = "   1  "
Text(2) = "freeze"
EndPrmText
;
PrmText = 19
Text(0) = "counter"
Text(1) = "freq. 0 - 1 kHz / DI"
Text(2) = "freq. 0 - 20 kHz gate 50ms  / DI"
Text(3) = "freq. 0 - 20 kHz gate 200ms / DI"
Text(4) = "freq. 0 - 20 kHz gate 1s    / DI"
EndPrmText
;
PrmText = 20
Text(0) = "positive edge"
Text(1) = "negative edge"
EndPrmText
;
PrmText = 21                     
Text(0) = "50 Hz"
Text(1) = "60 Hz"
Text(2) = "off"
EndPrmText
;
PrmText = 22                     
Text(0) = "Test current On"
Text(1) = "Test current Off"
EndPrmText
;
; definition of stations spec. parameters
;
;
ExtUserPrmData = 1 "signal diagnosis"         ; Referenznummer 1
Bit(0) 1 0-1                                  ; Default = 1 Min = 0 Max = 1
Prm_Text_Ref = 1                              ; Verweis auf Textnummer 1
EndExtUserPrmData
;
ExtUserPrmData = 8 "timeout output modules (x100ms)"
Unsigned8 1 1-255                                  
EndExtUserPrmData
;
ExtUserPrmData = 9 "IS1  CPM redundant "
Bit(7) 0 0-1                                  
Prm_Text_Ref = 9
EndExtUserPrmData
;
ExtUserPrmData = 7 "IS1  Line redundant"
Bit(6) 0 0-1                                  
Prm_Text_Ref = 9
EndExtUserPrmData
;
ExtUserPrmData = 6 "IOM 9-16 on rail X4"
Bit(5) 0 0-1                                  
Prm_Text_Ref = 9
EndExtUserPrmData
;
; --------- modul spec. parameters AIM ------------
;
;
ExtUserPrmData = 10 "input signal in case of error"
BitArea(0-2) 3 000-007 
Prm_Text_Ref = 14                                
EndExtUserPrmData
;
;
ExtUserPrmData = 28 "measurem. range ac. NAMUR"
Bit(3) 0 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 11 "input filter timeconstant"
BitArea(0-1) 1 000-003                                 
Prm_Text_Ref = 13   
EndExtUserPrmData
;
;
ExtUserPrmData = 12 "input range input 0"
Bit(0) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 13 "input range input 1"
Bit(1) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 14 "input range input 2"
Bit(2) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 15 "input range input 3"
Bit(3) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 16 "input range input 4"
Bit(4) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 17 "input range input 5" 
Bit(5) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 18 "input range input 6"
Bit(6) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 19 "input range input 7" 
Bit(7) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 20 "error detection input 0"
Bit(0) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 21 "error detection input 1"
Bit(1) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 22 "error detection input 2"
Bit(2) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 23 "error detection input 3"
Bit(3) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 24 "error detection input 4"
Bit(4) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 25 "error detection input 5"
Bit(5) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 26 "error detection input 6"
Bit(6) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 27 "error detection input 7"
Bit(7) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
; see  = 117 "Scan HART Livelist"
;
;
; ---------- modul spec. parameters AOM -----------
;
;
ExtUserPrmData = 30 "output signal in case of error"  
BitArea(0-2) 1 000-007 
Prm_Text_Ref = 17                                
EndExtUserPrmData
;
ExtUserPrmData = 31 "output range output 0" 
Bit(0) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 32 "output range output 1" 
Bit(1) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 33 "output range output 2" 
Bit(2) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 34 "output range output 3" 
Bit(3) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 35 "output range output 4"
Bit(4) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 36 "output range output 5" 
Bit(5) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 37 "output range output 6" 
Bit(6) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 38 "output range output 7"
Bit(7) 1 0-1                                 
Prm_Text_Ref = 12   
EndExtUserPrmData
;
;
ExtUserPrmData = 39 "error detection output 0" 
Bit(0) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 40 "error detection output 1" 
Bit(1) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 41 "error detection output 2"
Bit(2) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 42 "error detection output 3" 
Bit(3) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 43 "error detection output 4"  
Bit(4) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 44 "error detection output 5"        
Bit(5) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 45 "error detection output 6"          
Bit(6) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 46 "error detection output 7"          
Bit(7) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
; see  = 117 "Scan HART Livelist"
;
;
;
; ---------- modul spec. parameters DIM ------------
;
;
ExtUserPrmData = 50 "DI signals in case of error" 
BitArea(3-4) 0 000-003 
Prm_Text_Ref = 15                                
EndExtUserPrmData
;
ExtUserPrmData = 51 "invert all inputs"
Bit(5) 0 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 52 "pulse extension (I0 to I3)" 
BitArea(0-1) 0 000-003 
Prm_Text_Ref = 16                                
EndExtUserPrmData
;
ExtUserPrmData = 53 "pulse extension (I4 to I15)"  
BitArea(2-3) 0 000-003 
Prm_Text_Ref = 16                                
EndExtUserPrmData
;
ExtUserPrmData = 54 "error detection input 0"
Bit(0) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 55 "error detection input 1"
Bit(1) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 56 "error detection input 2"
Bit(2) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 57 "error detection input 3"
Bit(3) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 58 "error detection input 4"
Bit(4) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 59 "error detection input 5"
Bit(5) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 60 "error detection input 6"
Bit(6) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 61 "error detection input 7"
Bit(7) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 62 "error detection input 8"
Bit(0) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 63 "error detection input 9"
Bit(1) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 64 "error detection input 10"
Bit(2) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 65 "error detection input 11"
Bit(3) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 66 "error detection input 12"
Bit(4) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 67 "error detection input 13"
Bit(5) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 68 "error detection input 14"
Bit(6) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
ExtUserPrmData = 69 "error detection input 15"
Bit(7) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
; ------------ additional at DIM+CF  -----------
;
ExtUserPrmData = 89 "operation mode input 14"          
BitArea(0-2) 1 000-004 
Prm_Text_Ref = 19                                
EndExtUserPrmData
;
ExtUserPrmData = 90 "operation mode input 15"          
BitArea(3-5) 1 000-004 
Prm_Text_Ref = 19                                
EndExtUserPrmData
;
ExtUserPrmData = 91 "counter event"
Bit(6) 0 0-1                                 
Prm_Text_Ref = 20   
EndExtUserPrmData
;
;
; ------------ modul spec. parameters DOM -----------
;
;
ExtUserPrmData = 80 "output signals in case of error"  
BitArea(3-4) 0 000-003 
Prm_Text_Ref = 18                                
EndExtUserPrmData
;
ExtUserPrmData = 81 "error detection output 0" 
Bit(0) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 82 "error detection output 1" 
Bit(1) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 83 "error detection output 2"
Bit(2) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 84 "error detection output 3" 
Bit(3) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 85 "error detection output 4"  
Bit(4) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 86 "error detection output 5"        
Bit(5) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 87 "error detection output 6"          
Bit(6) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;
ExtUserPrmData = 88 "error detection output 7"          
Bit(7) 1 0-1                                 
Prm_Text_Ref = 10   
EndExtUserPrmData
;
;--------- Parameter effective for 9475/... from Rev. F
;
ExtUserPrmData = 109 "If output 0 = Off:"          
Bit(0) 0 0-1                                 
Prm_Text_Ref = 22   
EndExtUserPrmData
;
ExtUserPrmData = 110 "If output 1 = Off:"          
Bit(1) 0 0-1                                 
Prm_Text_Ref = 22   
EndExtUserPrmData
;
ExtUserPrmData = 111 "If output 2 = Off:"          
Bit(2) 0 0-1                                 
Prm_Text_Ref = 22   
EndExtUserPrmData
;
ExtUserPrmData = 112 "If output 3 = Off:"          
Bit(3) 0 0-1                                 
Prm_Text_Ref = 22   
EndExtUserPrmData
;
ExtUserPrmData = 113 "If output 4 = Off:"          
Bit(4) 0 0-1                                 
Prm_Text_Ref = 22   
EndExtUserPrmData
;
ExtUserPrmData = 114 "If output 5 = Off:"          
Bit(5) 0 0-1                                 
Prm_Text_Ref = 22   
EndExtUserPrmData
;
ExtUserPrmData = 115 "If output 6 = Off:"          
Bit(6) 0 0-1                                 
Prm_Text_Ref = 22   
EndExtUserPrmData
;
ExtUserPrmData = 116 "If output 7 = Off:"          
Bit(7) 0 0-1                                 
Prm_Text_Ref = 22   
EndExtUserPrmData
;
; ---------- Modulspez. Parameter TIM ------------
;
ExtUserPrmData = 92 "input signal in case of error"
BitArea(0-2) 3 000-007 
Prm_Text_Ref = 6                                
EndExtUserPrmData
;
ExtUserPrmData = 93 "Operation mode"
Bit(3) 0 0-1                                 
Prm_Text_Ref = 3   
EndExtUserPrmData
;
ExtUserPrmData = 94 "Input filter"
Bit(6) 0 0-1                                 
Prm_Text_Ref = 2   
EndExtUserPrmData
;
ExtUserPrmData = 70 "Input Filter"
BitArea(6-7) 0 000-002 
Prm_Text_Ref = 21                                
EndExtUserPrmData
;
ExtUserPrmData = 95 "Type inputs 0 and 1"
BitArea(0-3) 0 0-15 
Prm_Text_Ref = 4                                
EndExtUserPrmData
;
ExtUserPrmData = 96 "Connection inputs 0 and 1"
BitArea(0-1) 2 000-002 
Prm_Text_Ref = 5                                
EndExtUserPrmData
;
ExtUserPrmData = 97 "Type inputs 2 and 3"
BitArea(4-7) 0 0-15 
Prm_Text_Ref = 4                                
EndExtUserPrmData
;
ExtUserPrmData = 98 "Connection inputs 2 and 3"
BitArea(2-3) 2 000-002 
Prm_Text_Ref = 5                                
EndExtUserPrmData
;
ExtUserPrmData = 99 "Type inputs 4 and 5"
BitArea(0-3) 0 0-15 
Prm_Text_Ref = 4                                
EndExtUserPrmData
;
ExtUserPrmData = 100 "Connection inputs 4 and 5"
BitArea(4-5) 2 000-002 
Prm_Text_Ref = 5                                
EndExtUserPrmData
;
ExtUserPrmData = 101 "Type inputs 6 and 7"
BitArea(4-7) 0 0-15 
Prm_Text_Ref = 4                                
EndExtUserPrmData
;
ExtUserPrmData = 102 "Connection inputs 6 and 7"
BitArea(6-7) 2 000-002 
Prm_Text_Ref = 5                                
EndExtUserPrmData
;
; TIM mV
;
ExtUserPrmData = 103 "Input signals"
Bit(7) 0 0-1                                 
Prm_Text_Ref = 11   
EndExtUserPrmData
;
ExtUserPrmData = 104 "Cold junction"
BitArea(4-5) 0 000-003 
Prm_Text_Ref = 8                                
EndExtUserPrmData
;
ExtUserPrmData = 105 "Type Inputs 0 and 1"
BitArea(0-3) 4 0-11 
Prm_Text_Ref = 7                                
EndExtUserPrmData
;
ExtUserPrmData = 106 "Type Inputs 2 and 3"
BitArea(4-7) 4 0-11 
Prm_Text_Ref = 7                                
EndExtUserPrmData
;
ExtUserPrmData = 107 "Type Inputs 4 and 5"
BitArea(0-3) 4 0-11 
Prm_Text_Ref = 7                                
EndExtUserPrmData
;
ExtUserPrmData = 108 "Type Inputs 6 and 7"
BitArea(4-7) 4 0-11 
Prm_Text_Ref = 7                                
EndExtUserPrmData
;
; error detection inputs 0 - 7 as AIM (20 - 27) 
;
;für AIMH und AOMH:
ExtUserPrmData = 117 "Scan HART Livelist"
Bit(7) 1 0-1                                 
Prm_Text_Ref = 1   
EndExtUserPrmData
;
;
; definition of station spec. parameters
;
Ext_User_Prm_Data_Const(0) = 0,0,0,0,0,0,1           ;Konstanten 7 Byte ab Byte 0 - 6   ; Byte 6 Versionskennung
Ext_User_Prm_Data_Ref(7) = 8                         ;Referenzn. 8 in Byte 7 
Ext_User_Prm_Data_Ref(8) = 1                         ;Referenzn. 1 in Byte 8 
Ext_User_Prm_Data_Ref(8) = 9                         ;Referenzn. 9  in Byte 8
Ext_User_Prm_Data_Ref(8) = 7                         ;Referenzn. 7  in Byte 8
Ext_User_Prm_Data_Ref(8) = 6                         ;Referenzn. 6  in Byte 8
Ext_User_Prm_Data_Const(9) = 0
;
;
; -------- definition of modules with modul spec. parameters ----------------------
;
Module="9440/12-01-11 CPM Z1 Stahl24V" 0x00 
1
EndModule
;
Module="9440/12-01-11 CPM Z1 Stahl24VRed" 0x30 
2
EndModule
;
Module="9440/15-01-11 CPM Z2 Stahl24V" 0x00 
3
EndModule
;
Module="9440/15-01-11 CPM Z2 Stahl24VRed" 0x30 
4
EndModule
;
Module="9440/22-01-11 CPM Z1 PNO24V" 0x00 
5
EndModule
;
Module="9440/22-01-11 CPM Z1 PNO24VRed" 0x30 
6
EndModule
;
Module="9440/22-01-21 CPM Z1 PNO230V" 0x00 
7
EndModule
;
Module="9440/22-01-21 CPM Z1 PNO230VRed" 0x30 
8
EndModule
;
;
Module = "9460/12-08-11 AIM 4/8      Exi" 0x42,0x47,0x30,0x03 
20
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x03,0x00,0x01,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 28
Ext_User_Prm_Data_Ref(2) = 11
Ext_User_Prm_Data_Ref(3) = 12
Ext_User_Prm_Data_Ref(3) = 13
Ext_User_Prm_Data_Ref(3) = 14
Ext_User_Prm_Data_Ref(3) = 15
Ext_User_Prm_Data_Ref(3) = 16
Ext_User_Prm_Data_Ref(3) = 17
Ext_User_Prm_Data_Ref(3) = 18
Ext_User_Prm_Data_Ref(3) = 19
Ext_User_Prm_Data_Ref(4) = 20
Ext_User_Prm_Data_Ref(4) = 21
Ext_User_Prm_Data_Ref(4) = 22
Ext_User_Prm_Data_Ref(4) = 23
Ext_User_Prm_Data_Ref(4) = 24
Ext_User_Prm_Data_Ref(4) = 25
Ext_User_Prm_Data_Ref(4) = 26
Ext_User_Prm_Data_Ref(4) = 27
EndModule
;
;
Module = "9461/12-08-11 AIMH 8    2w Exi" 0x42,0x47,0x30,0x05 
21
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x03,0x00,0x01,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 28
Ext_User_Prm_Data_Ref(2) = 11
Ext_User_Prm_Data_Ref(3) = 12
Ext_User_Prm_Data_Ref(3) = 13
Ext_User_Prm_Data_Ref(3) = 14
Ext_User_Prm_Data_Ref(3) = 15
Ext_User_Prm_Data_Ref(3) = 16
Ext_User_Prm_Data_Ref(3) = 17
Ext_User_Prm_Data_Ref(3) = 18
Ext_User_Prm_Data_Ref(3) = 19
Ext_User_Prm_Data_Ref(4) = 20
Ext_User_Prm_Data_Ref(4) = 21
Ext_User_Prm_Data_Ref(4) = 22
Ext_User_Prm_Data_Ref(4) = 23
Ext_User_Prm_Data_Ref(4) = 24
Ext_User_Prm_Data_Ref(4) = 25
Ext_User_Prm_Data_Ref(4) = 26
Ext_User_Prm_Data_Ref(4) = 27
Ext_User_Prm_Data_Ref(2) = 117
Subsys_Module_Dir_Index(1) = 148
EndModule
;
;
Module = "9461/12-08-21 AIMH 8       Exi" 0x42,0x47,0x30,0x06  
22
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x03,0x00,0x01,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 28
Ext_User_Prm_Data_Ref(2) = 11
Ext_User_Prm_Data_Ref(3) = 12
Ext_User_Prm_Data_Ref(3) = 13
Ext_User_Prm_Data_Ref(3) = 14
Ext_User_Prm_Data_Ref(3) = 15
Ext_User_Prm_Data_Ref(3) = 16
Ext_User_Prm_Data_Ref(3) = 17
Ext_User_Prm_Data_Ref(3) = 18
Ext_User_Prm_Data_Ref(3) = 19
Ext_User_Prm_Data_Ref(4) = 20
Ext_User_Prm_Data_Ref(4) = 21
Ext_User_Prm_Data_Ref(4) = 22
Ext_User_Prm_Data_Ref(4) = 23
Ext_User_Prm_Data_Ref(4) = 24
Ext_User_Prm_Data_Ref(4) = 25
Ext_User_Prm_Data_Ref(4) = 26
Ext_User_Prm_Data_Ref(4) = 27
Ext_User_Prm_Data_Ref(2) = 117
Subsys_Module_Dir_Index(1) = 148
EndModule
;
;
Module = "9461/15-08-12 AIMH 8    2w Exn" 0x42,0x47,0x30,0x07 
46
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x03,0x00,0x01,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 28
Ext_User_Prm_Data_Ref(2) = 11
Ext_User_Prm_Data_Ref(3) = 12
Ext_User_Prm_Data_Ref(3) = 13
Ext_User_Prm_Data_Ref(3) = 14
Ext_User_Prm_Data_Ref(3) = 15
Ext_User_Prm_Data_Ref(3) = 16
Ext_User_Prm_Data_Ref(3) = 17
Ext_User_Prm_Data_Ref(3) = 18
Ext_User_Prm_Data_Ref(3) = 19
Ext_User_Prm_Data_Ref(4) = 20
Ext_User_Prm_Data_Ref(4) = 21
Ext_User_Prm_Data_Ref(4) = 22
Ext_User_Prm_Data_Ref(4) = 23
Ext_User_Prm_Data_Ref(4) = 24
Ext_User_Prm_Data_Ref(4) = 25
Ext_User_Prm_Data_Ref(4) = 26
Ext_User_Prm_Data_Ref(4) = 27
Ext_User_Prm_Data_Ref(2) = 117
Subsys_Module_Dir_Index(1) = 148
EndModule
;
;
Module = "9465/12-08-11 AOM  8       Exi" 0x82,0x47,0x40,0x09
23
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x01,0x00,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 30
Ext_User_Prm_Data_Ref(3) = 31
Ext_User_Prm_Data_Ref(3) = 32
Ext_User_Prm_Data_Ref(3) = 33
Ext_User_Prm_Data_Ref(3) = 34
Ext_User_Prm_Data_Ref(3) = 35
Ext_User_Prm_Data_Ref(3) = 36
Ext_User_Prm_Data_Ref(3) = 37
Ext_User_Prm_Data_Ref(3) = 38
Ext_User_Prm_Data_Ref(4) = 39
Ext_User_Prm_Data_Ref(4) = 40
Ext_User_Prm_Data_Ref(4) = 41
Ext_User_Prm_Data_Ref(4) = 42
Ext_User_Prm_Data_Ref(4) = 43
Ext_User_Prm_Data_Ref(4) = 44
Ext_User_Prm_Data_Ref(4) = 45
Ext_User_Prm_Data_Ref(4) = 46
EndModule
;
;
Module = "9466/12-08-11 AOMH 8       Exi" 0x82,0x47,0x40,0x0b
24
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x01,0x00,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 30
Ext_User_Prm_Data_Ref(3) = 31
Ext_User_Prm_Data_Ref(3) = 32
Ext_User_Prm_Data_Ref(3) = 33
Ext_User_Prm_Data_Ref(3) = 34
Ext_User_Prm_Data_Ref(3) = 35
Ext_User_Prm_Data_Ref(3) = 36
Ext_User_Prm_Data_Ref(3) = 37
Ext_User_Prm_Data_Ref(3) = 38
Ext_User_Prm_Data_Ref(4) = 39
Ext_User_Prm_Data_Ref(4) = 40
Ext_User_Prm_Data_Ref(4) = 41
Ext_User_Prm_Data_Ref(4) = 42
Ext_User_Prm_Data_Ref(4) = 43
Ext_User_Prm_Data_Ref(4) = 44
Ext_User_Prm_Data_Ref(4) = 45
Ext_User_Prm_Data_Ref(4) = 46
Ext_User_Prm_Data_Ref(2) = 117
Subsys_Module_Dir_Index(1) = 148
EndModule
;
;
Module = "9466/15-08-12 AOMH 8       Exn" 0x82,0x47,0x40,0x0c
47
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x01,0x00,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 30
Ext_User_Prm_Data_Ref(3) = 31
Ext_User_Prm_Data_Ref(3) = 32
Ext_User_Prm_Data_Ref(3) = 33
Ext_User_Prm_Data_Ref(3) = 34
Ext_User_Prm_Data_Ref(3) = 35
Ext_User_Prm_Data_Ref(3) = 36
Ext_User_Prm_Data_Ref(3) = 37
Ext_User_Prm_Data_Ref(3) = 38
Ext_User_Prm_Data_Ref(4) = 39
Ext_User_Prm_Data_Ref(4) = 40
Ext_User_Prm_Data_Ref(4) = 41
Ext_User_Prm_Data_Ref(4) = 42
Ext_User_Prm_Data_Ref(4) = 43
Ext_User_Prm_Data_Ref(4) = 44
Ext_User_Prm_Data_Ref(4) = 45
Ext_User_Prm_Data_Ref(4) = 46
Ext_User_Prm_Data_Ref(2) = 117
Subsys_Module_Dir_Index(1) = 148
EndModule
;
;
;DIM - 16   4 Byte with status (CF not possible):
Module = "9470/12-16-11 DIM 16    NamExi" 0x42,0x83,0x11,0x0d
25
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 50
Ext_User_Prm_Data_Ref(2) = 51
Ext_User_Prm_Data_Ref(2) = 52
Ext_User_Prm_Data_Ref(2) = 53
Ext_User_Prm_Data_Ref(3) = 54
Ext_User_Prm_Data_Ref(3) = 55
Ext_User_Prm_Data_Ref(3) = 56
Ext_User_Prm_Data_Ref(3) = 57
Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 59
Ext_User_Prm_Data_Ref(3) = 60
Ext_User_Prm_Data_Ref(3) = 61
Ext_User_Prm_Data_Ref(4) = 62
Ext_User_Prm_Data_Ref(4) = 63
Ext_User_Prm_Data_Ref(4) = 64
Ext_User_Prm_Data_Ref(4) = 65
Ext_User_Prm_Data_Ref(4) = 66
Ext_User_Prm_Data_Ref(4) = 67
Ext_User_Prm_Data_Ref(4) = 68
Ext_User_Prm_Data_Ref(4) = 69
EndModule
;
;DIM - 16   4 Byte with status: (CF possible)
Module = "9470/22-16-11 DIM 16    NamExi" 0x42,0x83,0x11,0x0d
26
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 50
Ext_User_Prm_Data_Ref(2) = 51
Ext_User_Prm_Data_Ref(2) = 52
Ext_User_Prm_Data_Ref(2) = 53
Ext_User_Prm_Data_Ref(3) = 54
Ext_User_Prm_Data_Ref(3) = 55
Ext_User_Prm_Data_Ref(3) = 56
Ext_User_Prm_Data_Ref(3) = 57
Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 59
Ext_User_Prm_Data_Ref(3) = 60
Ext_User_Prm_Data_Ref(3) = 61
Ext_User_Prm_Data_Ref(4) = 62
Ext_User_Prm_Data_Ref(4) = 63
Ext_User_Prm_Data_Ref(4) = 64
Ext_User_Prm_Data_Ref(4) = 65
Ext_User_Prm_Data_Ref(4) = 66
Ext_User_Prm_Data_Ref(4) = 67
Ext_User_Prm_Data_Ref(4) = 68
Ext_User_Prm_Data_Ref(4) = 69
EndModule
;
;
;DIM - 16+CF    8 Byte with status inputs + 1 Byte Output
Module = "9470/22-16-11 DIM 16+CF NamExi" 0xC2,0x00,0x87,0x12,0x0d        
27
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x09,0x00,0xFF,0xFF       ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 50
Ext_User_Prm_Data_Ref(2) = 51
Ext_User_Prm_Data_Ref(2) = 52
Ext_User_Prm_Data_Ref(2) = 53
Ext_User_Prm_Data_Ref(1) = 89
Ext_User_Prm_Data_Ref(1) = 90
Ext_User_Prm_Data_Ref(1) = 91
Ext_User_Prm_Data_Ref(3) = 54
Ext_User_Prm_Data_Ref(3) = 55
Ext_User_Prm_Data_Ref(3) = 56
Ext_User_Prm_Data_Ref(3) = 57
Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 59
Ext_User_Prm_Data_Ref(3) = 60
Ext_User_Prm_Data_Ref(3) = 61
Ext_User_Prm_Data_Ref(4) = 62
Ext_User_Prm_Data_Ref(4) = 63
Ext_User_Prm_Data_Ref(4) = 64
Ext_User_Prm_Data_Ref(4) = 65
Ext_User_Prm_Data_Ref(4) = 66
Ext_User_Prm_Data_Ref(4) = 67
Ext_User_Prm_Data_Ref(4) = 68
Ext_User_Prm_Data_Ref(4) = 69
EndModule
;
;
;DIM - 16   4 Byte with status: (CF possible)
Module = "9470/25-16-12 DIM 16    NamExn" 0x42,0x83,0x11,0x0e
48
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 50
Ext_User_Prm_Data_Ref(2) = 51
Ext_User_Prm_Data_Ref(2) = 52
Ext_User_Prm_Data_Ref(2) = 53
Ext_User_Prm_Data_Ref(3) = 54
Ext_User_Prm_Data_Ref(3) = 55
Ext_User_Prm_Data_Ref(3) = 56
Ext_User_Prm_Data_Ref(3) = 57
Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 59
Ext_User_Prm_Data_Ref(3) = 60
Ext_User_Prm_Data_Ref(3) = 61
Ext_User_Prm_Data_Ref(4) = 62
Ext_User_Prm_Data_Ref(4) = 63
Ext_User_Prm_Data_Ref(4) = 64
Ext_User_Prm_Data_Ref(4) = 65
Ext_User_Prm_Data_Ref(4) = 66
Ext_User_Prm_Data_Ref(4) = 67
Ext_User_Prm_Data_Ref(4) = 68
Ext_User_Prm_Data_Ref(4) = 69
EndModule
;
;
;DIM - 16+CF    8 Byte with status inputs + 1 Byte Output
Module = "9470/25-16-12 DIM 16+CF NamExn" 0xC2,0x00,0x87,0x12,0x0e        
49
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x09,0x00,0xFF,0xFF       ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 50
Ext_User_Prm_Data_Ref(2) = 51
Ext_User_Prm_Data_Ref(2) = 52
Ext_User_Prm_Data_Ref(2) = 53
Ext_User_Prm_Data_Ref(1) = 89
Ext_User_Prm_Data_Ref(1) = 90
Ext_User_Prm_Data_Ref(1) = 91
Ext_User_Prm_Data_Ref(3) = 54
Ext_User_Prm_Data_Ref(3) = 55
Ext_User_Prm_Data_Ref(3) = 56
Ext_User_Prm_Data_Ref(3) = 57
Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 59
Ext_User_Prm_Data_Ref(3) = 60
Ext_User_Prm_Data_Ref(3) = 61
Ext_User_Prm_Data_Ref(4) = 62
Ext_User_Prm_Data_Ref(4) = 63
Ext_User_Prm_Data_Ref(4) = 64
Ext_User_Prm_Data_Ref(4) = 65
Ext_User_Prm_Data_Ref(4) = 66
Ext_User_Prm_Data_Ref(4) = 67
Ext_User_Prm_Data_Ref(4) = 68
Ext_User_Prm_Data_Ref(4) = 69
EndModule
;
;DIM - 16   4 Byte with status: (CF possible)
Module = "9471/10-16-11 DIM 16    24V   " 0x42,0x83,0x11,0x0f
28
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0x00        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 50
Ext_User_Prm_Data_Ref(2) = 51
Ext_User_Prm_Data_Ref(2) = 52
Ext_User_Prm_Data_Ref(2) = 53
EndModule
;
;DIM - 16+CF    8 Byte with status inputs + 1 Byte Output
Module = "9471/10-16-11 DIM 16+CF 24V   " 0xC2,0x00,0x87,0x12,0x0f        
29
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x09,0x00,0x00,0x00       ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 50
Ext_User_Prm_Data_Ref(2) = 51
Ext_User_Prm_Data_Ref(2) = 52
Ext_User_Prm_Data_Ref(2) = 53
Ext_User_Prm_Data_Ref(1) = 89
Ext_User_Prm_Data_Ref(1) = 90
Ext_User_Prm_Data_Ref(1) = 91
EndModule
;
;
;DIM - 16   4 Byte with status: (CF possible)
Module = "9471/15-16-12 DIM 16    24V Exn" 0x42,0x83,0x11,0x11
50
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0x00        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 50
Ext_User_Prm_Data_Ref(2) = 51
Ext_User_Prm_Data_Ref(2) = 52
Ext_User_Prm_Data_Ref(2) = 53
EndModule
;
;DIM - 16+CF    8 Byte with status inputs + 1 Byte Output
Module = "9471/15-16-12 DIM 16+CF 24V Exn" 0xC2,0x00,0x87,0x12,0x11        
51
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x09,0x00,0x00,0x00       ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 50
Ext_User_Prm_Data_Ref(2) = 51
Ext_User_Prm_Data_Ref(2) = 52
Ext_User_Prm_Data_Ref(2) = 53
Ext_User_Prm_Data_Ref(1) = 89
Ext_User_Prm_Data_Ref(1) = 90
Ext_User_Prm_Data_Ref(1) = 91
EndModule
;
Module = "9475/12-04-11 DOM 4       Exi1" 0x82,0x00,0x20,0x12
30
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0x0F        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(4) = 81
Ext_User_Prm_Data_Ref(4) = 82
Ext_User_Prm_Data_Ref(4) = 83
Ext_User_Prm_Data_Ref(4) = 84
;Ext_User_Prm_Data_Ref(4) = 85
;Ext_User_Prm_Data_Ref(4) = 86
;Ext_User_Prm_Data_Ref(4) = 87
;Ext_User_Prm_Data_Ref(4) = 88
Ext_User_Prm_Data_Ref(3) = 109
Ext_User_Prm_Data_Ref(3) = 110
Ext_User_Prm_Data_Ref(3) = 111
Ext_User_Prm_Data_Ref(3) = 112
;Ext_User_Prm_Data_Ref(3) = 113 .. 116
EndModule
;
Module = "9475/12-04-21 DOM 4       Exi2" 0x82,0x00,0x20,0x13
31
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0x0F        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(4) = 81
Ext_User_Prm_Data_Ref(4) = 82
Ext_User_Prm_Data_Ref(4) = 83
Ext_User_Prm_Data_Ref(4) = 84
;Ext_User_Prm_Data_Ref(4) = 85
;Ext_User_Prm_Data_Ref(4) = 86
;Ext_User_Prm_Data_Ref(4) = 87
;Ext_User_Prm_Data_Ref(4) = 88
Ext_User_Prm_Data_Ref(3) = 109
Ext_User_Prm_Data_Ref(3) = 110
Ext_User_Prm_Data_Ref(3) = 111
Ext_User_Prm_Data_Ref(3) = 112
;Ext_User_Prm_Data_Ref(3) = 113 .. 116
EndModule
;
Module = "9475/12-04-31 DOM 4       Exi3" 0x82,0x00,0x20,0x14
32
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0x0F        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(4) = 81
Ext_User_Prm_Data_Ref(4) = 82
Ext_User_Prm_Data_Ref(4) = 83
Ext_User_Prm_Data_Ref(4) = 84
;Ext_User_Prm_Data_Ref(4) = 85
;Ext_User_Prm_Data_Ref(4) = 86
;Ext_User_Prm_Data_Ref(4) = 87
;Ext_User_Prm_Data_Ref(4) = 88
Ext_User_Prm_Data_Ref(3) = 109
Ext_User_Prm_Data_Ref(3) = 110
Ext_User_Prm_Data_Ref(3) = 111
Ext_User_Prm_Data_Ref(3) = 112
;Ext_User_Prm_Data_Ref(3) = 113 .. 116
EndModule
;
Module = "9475/12-08-41 DOM 8       Exi1" 0x82,0x00,0x20,0x16
33
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(4) = 81
Ext_User_Prm_Data_Ref(4) = 82
Ext_User_Prm_Data_Ref(4) = 83
Ext_User_Prm_Data_Ref(4) = 84
Ext_User_Prm_Data_Ref(4) = 85
Ext_User_Prm_Data_Ref(4) = 86
Ext_User_Prm_Data_Ref(4) = 87
Ext_User_Prm_Data_Ref(4) = 88
Ext_User_Prm_Data_Ref(3) = 109
Ext_User_Prm_Data_Ref(3) = 110
Ext_User_Prm_Data_Ref(3) = 111
Ext_User_Prm_Data_Ref(3) = 112
Ext_User_Prm_Data_Ref(3) = 113
Ext_User_Prm_Data_Ref(3) = 114
Ext_User_Prm_Data_Ref(3) = 115
Ext_User_Prm_Data_Ref(3) = 116
EndModule
;
Module = "9475/12-08-51 DOM 8       Exi2" 0x82,0x00,0x20,0x17
34
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(4) = 81
Ext_User_Prm_Data_Ref(4) = 82
Ext_User_Prm_Data_Ref(4) = 83
Ext_User_Prm_Data_Ref(4) = 84
Ext_User_Prm_Data_Ref(4) = 85
Ext_User_Prm_Data_Ref(4) = 86
Ext_User_Prm_Data_Ref(4) = 87
Ext_User_Prm_Data_Ref(4) = 88
Ext_User_Prm_Data_Ref(3) = 109
Ext_User_Prm_Data_Ref(3) = 110
Ext_User_Prm_Data_Ref(3) = 111
Ext_User_Prm_Data_Ref(3) = 112
Ext_User_Prm_Data_Ref(3) = 113
Ext_User_Prm_Data_Ref(3) = 114
Ext_User_Prm_Data_Ref(3) = 115
Ext_User_Prm_Data_Ref(3) = 116
EndModule
;
Module = "9475/12-08-61 DOM 8       Exi3" 0x82,0x00,0x20,0x18
35
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(4) = 81
Ext_User_Prm_Data_Ref(4) = 82
Ext_User_Prm_Data_Ref(4) = 83
Ext_User_Prm_Data_Ref(4) = 84
Ext_User_Prm_Data_Ref(4) = 85
Ext_User_Prm_Data_Ref(4) = 86
Ext_User_Prm_Data_Ref(4) = 87
Ext_User_Prm_Data_Ref(4) = 88
Ext_User_Prm_Data_Ref(3) = 109
Ext_User_Prm_Data_Ref(3) = 110
Ext_User_Prm_Data_Ref(3) = 111
Ext_User_Prm_Data_Ref(3) = 112
Ext_User_Prm_Data_Ref(3) = 113
Ext_User_Prm_Data_Ref(3) = 114
Ext_User_Prm_Data_Ref(3) = 115
Ext_User_Prm_Data_Ref(3) = 116
EndModule
;
Module = "9475/12-07-71 DOM 7       Exi4" 0x82,0x00,0x20,0x1F
36
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0x7F        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(4) = 81
Ext_User_Prm_Data_Ref(4) = 82
Ext_User_Prm_Data_Ref(4) = 83
Ext_User_Prm_Data_Ref(4) = 84
Ext_User_Prm_Data_Ref(4) = 85
Ext_User_Prm_Data_Ref(4) = 86
Ext_User_Prm_Data_Ref(4) = 87
Ext_User_Prm_Data_Ref(3) = 109
Ext_User_Prm_Data_Ref(3) = 110
Ext_User_Prm_Data_Ref(3) = 111
Ext_User_Prm_Data_Ref(3) = 112
Ext_User_Prm_Data_Ref(3) = 113
Ext_User_Prm_Data_Ref(3) = 114
Ext_User_Prm_Data_Ref(3) = 115
;Ext_User_Prm_Data_Ref(3) = 116
EndModule
;
Module = "9475/22-04-21 DOM 4 OD    Exi2" 0x82,0x00,0x20,0x24
37
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(4) = 81
Ext_User_Prm_Data_Ref(4) = 82
Ext_User_Prm_Data_Ref(4) = 83
Ext_User_Prm_Data_Ref(4) = 84
;Ext_User_Prm_Data_Ref(4) = 85
;Ext_User_Prm_Data_Ref(4) = 86
;Ext_User_Prm_Data_Ref(4) = 87
;Ext_User_Prm_Data_Ref(4) = 88
Ext_User_Prm_Data_Ref(3) = 109
Ext_User_Prm_Data_Ref(3) = 110
Ext_User_Prm_Data_Ref(3) = 111
Ext_User_Prm_Data_Ref(3) = 112
;Ext_User_Prm_Data_Ref(3) = 113
;Ext_User_Prm_Data_Ref(3) = 114
;Ext_User_Prm_Data_Ref(3) = 115
;Ext_User_Prm_Data_Ref(3) = 116
EndModule
;
Module = "9475/22-08-51 DOM 8 OD    Exi2" 0x82,0x00,0x20,0x20
38
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(4) = 81
Ext_User_Prm_Data_Ref(4) = 82
Ext_User_Prm_Data_Ref(4) = 83
Ext_User_Prm_Data_Ref(4) = 84
Ext_User_Prm_Data_Ref(4) = 85
Ext_User_Prm_Data_Ref(4) = 86
Ext_User_Prm_Data_Ref(4) = 87
Ext_User_Prm_Data_Ref(4) = 88
Ext_User_Prm_Data_Ref(3) = 109
Ext_User_Prm_Data_Ref(3) = 110
Ext_User_Prm_Data_Ref(3) = 111
Ext_User_Prm_Data_Ref(3) = 112
Ext_User_Prm_Data_Ref(3) = 113
Ext_User_Prm_Data_Ref(3) = 114
Ext_User_Prm_Data_Ref(3) = 115
Ext_User_Prm_Data_Ref(3) = 116
EndModule
;
Module = "9475/22-08-61 DOM 8 OD    Exi3" 0x82,0x00,0x20,0x21
39
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(4) = 81
Ext_User_Prm_Data_Ref(4) = 82
Ext_User_Prm_Data_Ref(4) = 83
Ext_User_Prm_Data_Ref(4) = 84
Ext_User_Prm_Data_Ref(4) = 85
Ext_User_Prm_Data_Ref(4) = 86
Ext_User_Prm_Data_Ref(4) = 87
Ext_User_Prm_Data_Ref(4) = 88
Ext_User_Prm_Data_Ref(3) = 109
Ext_User_Prm_Data_Ref(3) = 110
Ext_User_Prm_Data_Ref(3) = 111
Ext_User_Prm_Data_Ref(3) = 112
Ext_User_Prm_Data_Ref(3) = 113
Ext_User_Prm_Data_Ref(3) = 114
Ext_User_Prm_Data_Ref(3) = 115
Ext_User_Prm_Data_Ref(3) = 116
EndModule
;
Module = "9477/10-08-12 DOM 8     Rel   " 0x82,0x00,0x20,0x19
40
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0x00        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
EndModule
;
Module = "9477/12-08-12 DOM 8 60V Rel Z1" 0x82,0x00,0x20,0x22
41
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0x00        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
EndModule
;
Module = "9477/12-06-12 DOM 6 250VRel Z1" 0x82,0x00,0x20,0x23
42
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0x00        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
EndModule
;
Module = "9477/15-08-12 DOM 8     Rel Z2" 0x82,0x00,0x20,0x1e
43
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0x00        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
EndModule
;
Module = "9480/12-08-11 TIM  8    R  Exi" 0x42,0x47,0x30,0x1a 
44
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x03,0x00,0x00,0xaa,0xff        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 92
Ext_User_Prm_Data_Ref(0) = 93
Ext_User_Prm_Data_Ref(0) = 70
Ext_User_Prm_Data_Ref(1) = 95
Ext_User_Prm_Data_Ref(3) = 96
Ext_User_Prm_Data_Ref(1) = 97
Ext_User_Prm_Data_Ref(3) = 98
Ext_User_Prm_Data_Ref(2) = 99
Ext_User_Prm_Data_Ref(3) = 100
Ext_User_Prm_Data_Ref(2) = 101
Ext_User_Prm_Data_Ref(3) = 102
Ext_User_Prm_Data_Ref(4) = 20
Ext_User_Prm_Data_Ref(4) = 21
Ext_User_Prm_Data_Ref(4) = 22
Ext_User_Prm_Data_Ref(4) = 23
Ext_User_Prm_Data_Ref(4) = 24
Ext_User_Prm_Data_Ref(4) = 25
Ext_User_Prm_Data_Ref(4) = 26
Ext_User_Prm_Data_Ref(4) = 27
EndModule
;
Module = "9481/12-08-11 TIM  8    mV Exi" 0x42,0x47,0x30,0x1c  
45
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x03,0x44,0x44,0x00,0xff        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 92
Ext_User_Prm_Data_Ref(0) = 103
Ext_User_Prm_Data_Ref(0) = 94
Ext_User_Prm_Data_Ref(0) = 104
Ext_User_Prm_Data_Ref(1) = 105
Ext_User_Prm_Data_Ref(1) = 106
Ext_User_Prm_Data_Ref(2) = 107
Ext_User_Prm_Data_Ref(2) = 108
Ext_User_Prm_Data_Ref(4) = 20
Ext_User_Prm_Data_Ref(4) = 21
Ext_User_Prm_Data_Ref(4) = 22
Ext_User_Prm_Data_Ref(4) = 23
Ext_User_Prm_Data_Ref(4) = 24
Ext_User_Prm_Data_Ref(4) = 25
Ext_User_Prm_Data_Ref(4) = 26
Ext_User_Prm_Data_Ref(4) = 27
Channel_Diag(16) = "cold junction error"
EndModule
;
;
; ------- Modul descriptions in standard identifier format --------------------
;
; empty module
;
Module= "empty module " 0x00                       
100
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0x00        ;Default Modulparam. 5 Byte
EndModule
;
;
Module = "AIM 4/8 (9460/.., 9461/..)     " 0x57
101
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x03,0x00,0x01,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 10
Ext_User_Prm_Data_Ref(2) = 28
Ext_User_Prm_Data_Ref(2) = 11
Ext_User_Prm_Data_Ref(3) = 12
Ext_User_Prm_Data_Ref(3) = 13
Ext_User_Prm_Data_Ref(3) = 14
Ext_User_Prm_Data_Ref(3) = 15
Ext_User_Prm_Data_Ref(3) = 16
Ext_User_Prm_Data_Ref(3) = 17
Ext_User_Prm_Data_Ref(3) = 18
Ext_User_Prm_Data_Ref(3) = 19
Ext_User_Prm_Data_Ref(4) = 20
Ext_User_Prm_Data_Ref(4) = 21
Ext_User_Prm_Data_Ref(4) = 22
Ext_User_Prm_Data_Ref(4) = 23
Ext_User_Prm_Data_Ref(4) = 24
Ext_User_Prm_Data_Ref(4) = 25
Ext_User_Prm_Data_Ref(4) = 26
Ext_User_Prm_Data_Ref(4) = 27
EndModule
;
Module = "AOM 8   (9465/.., 9466/..)     " 0x67
102
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x01,0x00,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 30
Ext_User_Prm_Data_Ref(3) = 31
Ext_User_Prm_Data_Ref(3) = 32
Ext_User_Prm_Data_Ref(3) = 33
Ext_User_Prm_Data_Ref(3) = 34
Ext_User_Prm_Data_Ref(3) = 35
Ext_User_Prm_Data_Ref(3) = 36
Ext_User_Prm_Data_Ref(3) = 37
Ext_User_Prm_Data_Ref(3) = 38
Ext_User_Prm_Data_Ref(4) = 39
Ext_User_Prm_Data_Ref(4) = 40
Ext_User_Prm_Data_Ref(4) = 41
Ext_User_Prm_Data_Ref(4) = 42
Ext_User_Prm_Data_Ref(4) = 43
Ext_User_Prm_Data_Ref(4) = 44
Ext_User_Prm_Data_Ref(4) = 45
Ext_User_Prm_Data_Ref(4) = 46
EndModule
;
;DIM - 16   2 Byte without status:
Module = "DIM 16  (9470/.., 9471/..)     " 0x11
103
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0xFF,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(0) = 50
Ext_User_Prm_Data_Ref(2) = 51
Ext_User_Prm_Data_Ref(2) = 52
Ext_User_Prm_Data_Ref(2) = 53
Ext_User_Prm_Data_Ref(3) = 54
Ext_User_Prm_Data_Ref(3) = 55
Ext_User_Prm_Data_Ref(3) = 56
Ext_User_Prm_Data_Ref(3) = 57
Ext_User_Prm_Data_Ref(3) = 58
Ext_User_Prm_Data_Ref(3) = 59
Ext_User_Prm_Data_Ref(3) = 60
Ext_User_Prm_Data_Ref(3) = 61
Ext_User_Prm_Data_Ref(4) = 62
Ext_User_Prm_Data_Ref(4) = 63
Ext_User_Prm_Data_Ref(4) = 64
Ext_User_Prm_Data_Ref(4) = 65
Ext_User_Prm_Data_Ref(4) = 66
Ext_User_Prm_Data_Ref(4) = 67
Ext_User_Prm_Data_Ref(4) = 68
Ext_User_Prm_Data_Ref(4) = 69
EndModule
;
Module = "DOM 4/8 (9475/..)              " 0x20
104
Ext_Module_Prm_Data_Len=5
Ext_User_Prm_Data_Const(0) = 0x00,0x00,0x00,0x00,0xFF        ;Default Modulparam. 5 Byte
Ext_User_Prm_Data_Ref(1) = 80
Ext_User_Prm_Data_Ref(4) = 81
Ext_User_Prm_Data_Ref(4) = 82
Ext_User_Prm_Data_Ref(4) = 83
Ext_User_Prm_Data_Ref(4) = 84
Ext_User_Prm_Data_Ref(4) = 85
Ext_User_Prm_Data_Ref(4) = 86
Ext_User_Prm_Data_Ref(4) = 87
Ext_User_Prm_Data_Ref(4) = 88
EndModule
;