;========================= GSD file: PDPS10E6.GSD =====================
;
;DEVICE NAME:       P-CPAS
;DEVICE REVISION:   V0.1
;VENDOR NAME:       EL-O-Matic
;GSD REVISION DATE: 20-12-2000
;
;======================================================================

#Profibus_DP

GSD_Revision = 2

;========================= PRODUCT SPECIFICATIONS =====================

Vendor_Name         = "EL-O-Matic"
Model_Name          = "P-CPAS V2.0"
;OrderNumber         = "P-CPAS"
Ident_Number        = 0x20E6
Revision            = "Rev. 0.1"
Hardware_Release    = "Rev. 0.1"
Software_Release    = "Rev. 0.1"
Bitmap_Device       = "CPA20E6"

;========================= OVERALL PROFIBUS SPECIFICATIONS ============

FMS_supp            = 0
Protocol_Ident      = 0
Station_Type        = 0
Slave_Family        = 12

;========================= HARDWARE CONFIGURATION =====================

Implementation_Type = "SPC41/i-tec"
Redundancy          = 0
Repeater_Ctrl_Sig   = 0
24V_Pins            = 0

;========================= PROTOCOL CONFIGURATION =====================

Set_Slave_Add_supp  = 1
Auto_Baud_supp      = 0
Min_Slave_Intervall = 100
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Fail_Safe           = 0

;========================= SUPPORTED BAUDRATES ========================

31.25_supp          = 1
45.45_supp          = 1
93.75_supp          = 1

MaxTsdr_31.25       = 100
MaxTsdr_45.45       = 200
MaxTsdr_93.75       = 1000

;========================= DIAGNOSTIC DEFINITIONS =====================

Max_Diag_Data_Len   = 6

;========================= PARAMETER DEFINITIONS ======================
                   
User_Prm_Data_Len   = 3
User_Prm_Data       = 0,0,0

;========================= MODULE DEFINITIONS =========================

Modular_Station     = 1                      ; Compact station.
Max_Module          = 1                      ; Maximum # of modules: 1.

Max_Input_Len       = 7
Max_Output_Len      = 2
Max_Data_Len        = 9

Module              = "SP_D" 0x82, 0x81, 0x05, 0x05
EndModule

Module              = "SP_D+READBACK_D" 0x82, 0x81, 0x05, 0x05, \
                                        0x42, 0x81, 0x05, 0x05
EndModule

Module              = "SP_D+READBACK_D+AI" 0x82, 0x81, 0x05, 0x05, \
                                           0x42, 0x81, 0x05, 0x05, \
                                           0x42, 0x84, 0x08, 0x05
EndModule